New DevHeads get a 320-point leaderboard boost when joining the DevHeads IoT Integration Community. In addition to learning and advising, active community leaders are rewarded with community recognition and free tech stuff. Start your Legendary Collaboration now!
Good day everyone, I have gone through the Datasheet and User Manual for my STM32F4 Microcontroller Unit (MCU) in great detail, including PM0214 for STM32F4xx MCUs. Additionally, I have searched […]
In my last question, I misunderstood how GDB interprets memory when using different formats like `x/d` and `x/1wd`. After some digging, I realized the issue was related to GDB displaying […]
I’m using CLion (version X.X) for embedded development on an STM32F411 microcontroller with OpenOCD 0.11.0. While ‘build’ completes, the debugger fails with the following error: Error executing event examine-end on […]
How do I set up and establish communication between the ESP32 and the R307 fingerprint sensor, ensuring that the sensor can be recognized and initialized by the ESP32? My aim […]
Am working on a smart car automation system using MicroPython, the system include various functionalities such as `obstacle detection`, `line following`, `speed control`, and `environmental monitoring`. Am currently trying to […]
I’m programming an STM32 NUCLEO-F207ZG board and trying to output a PWM signal on pin PE_9 (D6) to drive an LED. I’m using low-level register programming (no HAL/LL drivers). However, […]
I am new to STM32WB15CC and am using the STM32WB15CC NUCLEO board. I successfully ran the BLE example `p2pserver` on my board, where the device is discoverable, and I can […]
Has anyone worked with the kalman filter from the DSP library for ESPs?
I’m working with the STM32 Nucleo L476RG board and the X-Nucleo IDB05A1 expansion board to develop Bluetooth Low Energy applications. My development environment is Keil uVision5, and I’ve successfully built […]
